Oven & Range Repair in Columbia, MD

What this repair covers

A cooking appliance that fails at dinner time needs a quick, accurate diagnosis. Oven and range repair in Columbia, MD covers ovens, stoves, ranges and cooktops, both gas and electric. The cause might be a weak igniter, a failed bake or broil element, a faulty temperature sensor, a burner switch or a control board, and each has distinct signs, so the symptom guides the diagnosis.

People use oven, stove and range interchangeably, and so do we: we repair freestanding and slide-in ranges, cooktops and wall ovens. Tell us whether yours is gas or electric, the brand, the model number and which part is acting up: the oven, a particular burner, the broiler or the controls. If you smell gas, leave the home and call your gas utility or 911 first, and do not use the stove.

Common Oven & Range Problems We Repair

The symptom usually points to the part. Here is what we see most often and what a technician checks.

• Oven will not heat (electric) — Failed bake element, temperature sensor, control board, thermal fuse. What we check: Element continuity, sensor resistance and control output
• Oven will not heat (gas) — Weak or failed igniter, gas safety valve. What we check: Igniter current and glow, valve operation
• Uneven heat or wrong temperature — Faulty temperature sensor, calibration, convection fan, worn door gasket. What we check: Actual vs set temperature, sensor, fan and door seal
• Gas burner won’t light — Clogged burner ports, dirty or failing igniter or spark module, wet burner cap. What we check: Burner assembly, spark module and igniter
• Electric surface element not heating — Failed element, burner receptacle, infinite switch. What we check: Element, receptacle and switch continuity
• Control panel or error code — Touchpad failure, control board, relay, sensor fault. What we check: What the code means for your model and the circuits it points to

Error codes vary by brand and model, so check your manual. If your range has a built-in or over-the-range microwave, see microwave repair page.

How Our Oven & Range Repair Visit Works

1. Tell us what is happening. Call (410) 555-0142 or request a visit and share the brand, model number, symptoms and any error code.
2. Confirm availability and fees. We confirm the earliest available appointment for your address and explain any diagnostic fee before you book.
3. Diagnosis on site. We check power or gas supply, igniters or elements, sensors and controls that match your symptoms.
4. Estimate before work. We explain what we found, the repair options and the price. Work starts only after you approve it.

Oven & Range Brands We Service

We service ranges, ovens and cooktops from brands such as Samsung, LG, Whirlpool, GE, Maytag, KitchenAid, Frigidaire, Electrolux, Bosch and Kenmore. Tell us the model number and whether it is gas, electric or dual fuel so we can confirm whether we can service it.

Brand names are the property of their respective owners and are used for identification only.

Repair or Replace Your Oven & Range?

Ranges commonly last roughly 13 to 15 years. Repair usually makes sense for igniters, elements, sensors, burner switches and door latches, which are common wear parts. Replacement may come up for an old range with several faults, a failed main control on an older unit, or damage to a glass cooktop where the repair approaches the price of a new range.

Gas and electric repairs involve different safety considerations, so if you smell gas, stop using the appliance and call your gas utility before anything else.

Quick Checks Before You Call

These simple checks can rule out an easy fix, and the answers help us when you call. Do not open sealed or high-voltage parts.

• Check the breaker. Electric ranges use a two-pole breaker, and both sides must be on.
• Check that the oven is not in a control lock or Sabbath mode, and that the display has power.
• For a gas burner, make sure the burner cap is seated and dry, and carefully clear food from the burner ports.
• If a burner clicks but won’t light, turn off the burner and ventilate before trying again.
• Make sure racks or foil are not blocking airflow or the oven temperature sensor.
• Stop using the oven if you see a damaged element, sparks or smoke.

Safety: If you smell gas, leave the home and call your gas utility or 911. Do not operate any switches.

Where we perform this service

Oven and range repair requests come from Columbia and nearby Howard County communities. Tell us whether your range is gas or electric when you call. Columbia is our primary service area, including the villages of Wilde Lake, Harper’s Choice, Oakland Mills, Long Reach, Owen Brown, Kings Contrivance, Hickory Ridge, Town Center, River Hill and Dorsey’s Search (ZIP codes 21044, 21045 and 21046). We also take requests in Ellicott City, Clarksville, Elkridge, Laurel, Jessup, Savage, Fulton, Glenelg and Catonsville. Give us your ZIP code and appliance details and we will confirm coverage at your address.