Dryer Repair in Columbia, MD

What this repair covers

A dryer that runs but leaves clothes damp is one of the most common laundry-room problems. Dryer repair in Columbia, MD starts by working out whether the issue is airflow, heat or mechanical. A clogged vent, a blown thermal fuse, a failed heating element or a worn belt can each cause very different symptoms, and the fixes and costs are different too.

We repair gas and electric dryers. Tell us which you have, along with the brand, the model number and what happens when you start a cycle. If you notice a burning smell, stop using the dryer and call us. If you smell gas, leave the home and call your gas utility or 911 before anything else.

Common Dryer Problems We Repair

The symptom usually points to the part. Here is what we see most often and what a technician checks.

• Runs but no heat (electric) — Blown thermal fuse, failed heating element, bad thermostat or high-limit, or a tripped breaker (electric dryers use two poles). What we check: Power at the unit, element, thermal fuse, thermostats and any airflow restriction that caused them to fail
• No heat (gas) — Weak or failed igniter, gas valve coils, flame sensor, closed gas supply. What we check: Igniter current and glow, valve coils and gas supply
• Takes too long to dry — Clogged lint screen or vent, kinked duct, failing sensor or reduced heat. What we check: Airflow at the vent, duct condition, moisture sensor and heat output
• Drum will not turn — Broken drive belt, worn idler pulley, motor fault, door switch. What we check: Belt, pulley, motor and switch
• Will not start — Door switch, start switch, thermal fuse, control, power supply. What we check: Power, door and start circuit, fuses
• Squealing, thumping or grinding — Worn drum rollers or glides, idler pulley, blower wheel, bearing, object in the drum. What we check: Rollers, glides, pulley, blower and drum

Fire safety organizations identify lint buildup as a leading cause of dryer fires, so airflow is checked as part of diagnosis. Laundry pair: see washer repair page.

How Our Dryer Repair Visit Works

1. Tell us what is happening. Call (410) 555-0142 or request a visit and share the brand, model number, symptoms and any error code.
2. Confirm availability and fees. We confirm the earliest available appointment for your address and explain any diagnostic fee before you book.
3. Diagnosis on site. We check power or gas supply, heat output, airflow through the vent, and the drive components that match your symptoms.
4. Estimate before work. We explain what we found, the repair options and the price. Work starts only after you approve it.

Dryer Brands We Service

We service dryers from brands such as Samsung, LG, Whirlpool, GE, Maytag, KitchenAid, Frigidaire, Electrolux, Bosch and Kenmore. Gas and electric versions of the same model use different parts, so share the exact model number.

Brand names are the property of their respective owners and are used for identification only.

Repair or Replace Your Dryer?

Dryers commonly last roughly 10 to 13 years. Repair usually makes sense for common parts such as a thermal fuse, heating element, igniter, belt or rollers, which can restore years of service. Replacement deserves a look when the dryer is old, has several failed components, or the estimate is close to the price of a new unit.

A dryer that has overheated because of a blocked vent can fail again until the airflow problem is fixed, so airflow is part of any good diagnosis.

Quick Checks Before You Call

These simple checks can rule out an easy fix, and the answers help us when you call. Do not open sealed or high-voltage parts.

• Clean the lint screen after every load, and wash it occasionally if it feels coated.
• Check that the vent hose behind the dryer is not crushed or kinked.
• Run the dryer and confirm the exterior vent flap opens and air is moving out.
• For an electric dryer, check that both breaker poles are on.
• Avoid overloading the drum.
• Stop using the dryer if you smell burning, and unplug it.

Safety: If you smell gas, leave the home and call your gas utility or 911. Do not use the dryer if you smell burning.

Where we perform this service

Dryer repair requests come from Columbia and nearby Howard County communities. Tell us whether the dryer is gas or electric when you call. Columbia is our primary service area, including the villages of Wilde Lake, Harper’s Choice, Oakland Mills, Long Reach, Owen Brown, Kings Contrivance, Hickory Ridge, Town Center, River Hill and Dorsey’s Search (ZIP codes 21044, 21045 and 21046). We also take requests in Ellicott City, Clarksville, Elkridge, Laurel, Jessup, Savage, Fulton, Glenelg and Catonsville. Give us your ZIP code and appliance details and we will confirm coverage at your address.